LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 473

Page: 473 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

198

3.13 RSG/IP Phone (

PGM 380 – 397

)

3.13.1 VOIB Slot Assignment, RSG/IP Phone (PGM 380)

PGM 380 defines the number of channels reserved for IP Phones.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

380.

3. Select the desired Flexible button.

4. Enter the appropriate value.

5. Press

the

[Hold/Save]

button.

PGM

380

Flex

Btn

Description

Default

Values

VOIB Slot for

RSG/IP Phones

This parameter defines the VOIB slot to employ for RSG modules and IP Phone.

ipLDK-60 supports a single slot, slot 10.

10 10

Channels for

RSG/IP Phones

This parameter defines the number of VOIB channels reserved for RSG and IP

Phones.

Not assigned

0 – 4 w/VOIB

0 – 8 w/VOIB & VOIU

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands