LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 440

Page: 440 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

165

3.9.8

Flexible DID Conversion Table (PGM 231)

PGM 231 defines the Type 2 DID destinations for various ring service modes.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

231.

3. Select Flexible button 1 to input a DID Destination,

Select Flexible button 2 to initialize the DID Conversion Table or
Select Flexible button 3 to delete all DID Table entries.

4. For input to the table, enter the DID Table index (000 ~ 999)

5. Select the desired Flexible button.

6. Enter the appropriate value.

7. Press

the

[Hold/Save]

button.

PGM

231

Flex

Btn

Description

Default

Values

DID Name

This parameter assigns a name, up to 12 characters, for the DID Conversion Table

index.

Not assigned

11 characters, see Dial

Pad Character Chart

Day Destination

This parameter defines the Flexible DID Conversion route for Day mode service.

Not assigned

01 ~ 12, see DID

Destination Chart below

Night Destination

This parameter defines the Flexible DID Conversion route for Night mode service.

Not assigned

01 ~ 12, see DID

Destination Chart below

Weekend

Destination

This parameter defines the Flexible DID Conversion route for Weekend mode

service.

Not assigned

01 ~ 12, see DID

Destination Chart below

Lunch

This parameter defines the Flexible DID Conversion route for Lunch mode service.

Not assigned

01 ~ 12, see DID

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Related manuals for ipldk-60

Brands by name

Popular brands