LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 365

Page: 365 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.5.6

Auto Attendant VMIB Announcement (PGM 165)

PGM 165 configures the back-up Auto Attendant Announcement used when the Attendant does not answer an incoming CO line call.

Procedure:

1. Press

the

[TRANS PGM]

button.

2. Dial

165.

3. Select the desired Flexible button.

4. Enter the appropriate value.

5. Press

the

[Hold/Save]

button.

PGM

165

Flex

Btn

Description

Default

Values

Auto Attendant

Usage

If this parameter is ‘On’, the back-up Auto Attendant is enabled and will play the

assigned VMIB announcement, refer to Flexible button 2.

0 (Off)]

0 = Off

1 = On

VMIB Announce

This parameter defines the VMIB announcement used for the back-up Auto

Attendant.

Not assigned

00 ~ 70

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands