LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 229

Page: 229 / 512

Issue 2.2

Feature Description and Operation Manual

221

15.2 IP address Dialing

Description

ipLDK users can call place calls over IP lines using the IP address of the called party.

Operation

To call an IP address,

1. Select an IP CO line.
2. Dial the IP address (use the * to dial the dots “.” in the IP address). Ex., for IP

Address: 156.147.3.201, dial 156*147*3*201)

3. Press the # button to place the call. If the called party is an ipLDK user, alerting will

follow the CO line Ring Assignment (PGM 144).

Consideration



When programming a Speed Dial for IP Address calling, the ‘#’ button must not be

included.



For DISA calls, outgoing access to a VoIP CO line is not possible.

Admin Programming

CO Line Service Type (PGM 140)

Assigns the type of CO line service (Normal, DID, DISA)

VOIB IP Setting (PGM 340)

Sets the IP parameters of the VOIB

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands