iPECS-MG Hardware Description and Installation Manual
Issue 1.1
DECT INSTALLATION
August, 2010
45
5.4 Extension Boards
5.4.1 (Single Line Interface Board w/RJ45)
The SLIB is available in two (2) models, the SLIB 12 with 12 analog Single Line Telephone ports and
the SLIB24 with 24 SLT ports. In both cases, the SLT ports are each terminated in an RJ45
connector. The SLIB provides FSK (ITU-T V.23 or Bell 202) or DTMF (ITU-T Q.23) Caller ID function
to the SLT. The SLT ports provide the -48 VDC source, current limited to 20 mA, to operate the SLT
and support the Message Wait Indication, DTMF, or Pulse Dial signaling, Polarity reversal, sinusoidal
Ring generator, and GR-909 Line Testing.
Figure 5.4.1-1 SLIB12/24
