LG-Ericsson iPECS ES-4526G, Installation Manual

Page: 34 / 98

C
HAPTER
1
| Introduction
Features and Benifits
– 34 –
ES-4550G / ES-4526G
F
EATURES AND
B
ENIFITS
C
ONNECTIVITY
◆
24 or 48 10/100/1000 Mbps ports for easy Gigabit Ethernet integration and
for protection of your investment in legacy LAN equipment.
◆
Auto-negotiation enables each RJ-45 port to automatically select the
optimum communication mode (half or full duplex) if this feature is
supported by the attached device; otherwise the port can be configured
manually.
◆
RJ-45 10/100/1000BASE-T ports support auto MDI/MDI-X pinout selection.
◆
Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better
for 10 Mbps connections, Category 5 or better for 100 Mbps connections,
and Category Category 5, 5e, 6 or better for 1000 Mbps connections.
◆
IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet, and IEEE
802.3ae 10 Gigabit Ethernet compliance ensures compatibility with
standards-based hubs, network cards and switches from any vendor.
◆
Provides stacking capability via high-speed serial ports with 48 Gbps
stacking bandwidth. Up to 8 units can be stacked together.
E
XPANDABILITY
◆ Supports 1000BASE-SX, 1000BASE-LX, and 1000BASE-LH SFP transceivers.
◆ Optional 10GBASE single-port expansion modules with an XFP or SFP+
transceiver slot.
Table 7: 10GBASE SFP+ Module LEDs
LED Condition Status
Link/Activity On/Flashing Green Port has a valid link at 10 Gbps. Flashing
indicates activity.
Off The link is down.