22
3.1.9 Installing the battery pack
CAUTION
Make sure that the inverter AC and DC disconnects are turned off before
connecting the power cable to the battery pack.
1. Fix the lift handles to the hex-socket
screws on the rear (marked position)
of both left and right sides.
Top
Bottom
2. Mount the wall bracket to a wall.
Tighten the screws, ensuring
that they are horizontally
driven into the wall. (Must be
installed with recommended
clearances(720mm[29"]) on the edge
of the wall bracket as shown in the
figure)
3. Mount the battery pack to a wall
bracket’s “U” shape clip using the
support by lift handles. Remove the
lift handles.
Installation
Summary of Contents for RESU10H StorEdge
Page 1: ...INSTALLATION MANUAL 10H ...
