LFA RTP 118 User Manual Download Page 9

Page: 9 / 78

Preface

The RTP 118

is a rotary tablet press that can efficiently produce a high volume of quality tablets.

With its nine Tooling heads and powerful motor, the RTP 118

has the ability to make up to 32,400

tablets an hour with a maximum of 60 kN of pressure. Rather than manually adjusting nuts and
cogs, the RTP 118

's advanced features include a convenient control console to manage tablet

thickness, fill depth, and production speed. Particularly popular in the pharmaceutical, chemical,
food, and electronic industries, the RTP 118

has been designed for research and development and

medium-sized production with an emphasis on safety and ease of use.

The purpose of this document is to support your understanding of the RTP 118

’s components,

features, functions, and design. With this manual, you will be able to successfully operate and
maintain your RTP 118

machine.

The user manual’s content includes:

• Important safety information
• RTP 118

installation instructions

• Description of the RTP 118

’s operation

• RTP 118

maintenance information

• Appendix with supplemental information

Summary of Contents for RTP 118















































































Search results

Summary of Contents for RTP 118

Reviews:

Related manuals for RTP 118

Brands by name

Popular brands

LFA RTP 118, User Manual

Search results

Summary of Contents for RTP 118

Reviews:

Related manuals for RTP 118

Brands by name

Popular brands