LEYBOLD 250000V01, Operating Manual, Page: 65 / 112

Operation
GA10218_002_C0 - 10/2016 - © Leybold GmbH 65
3.10.1 Vacuum Settings
Main menu > Settings > Vacuum settings
This menu allows to observe and to change the settings belonging to the vacuum
system.
The menu for the PHOENIX L300i DRY version allows the following vacuum set-
tings which varies to the PHOENIX L300i:
Softkey 3: Vent delay
Definition of delay time until the PHOENIX L300i is vented
Softkey 4: Vacuum ranges
Selection of the vacuum working modes
Softkey 5: Partial flow setup/Forepump setup
Selection of partial flow mode and forepump type
Softkey 6: Sniffer factor
Setting for the sniffer factor
Softkey 7: Machine factor
Setting for the machine factor
Softkey 8: Leak rate internal test leak
Setting for the internal test leak
Softkey 3: Vent delay
Definition of delay time until the PHOENIX L300i is vented
Softkey 4: Vacuum ranges
Selection of the vacuum working modes
Softkey 5: Purge in measurement
The purging during measurement mode can be switched on
Softkey 6: Sniffer factor
Setting for the sniffer factor
Softkey 7: Machine factor
Setting for the machine factor
Softkey 8: Leak rate internal test leak
Setting for the internal test leak
Vacuum settings PHOENIX
L300i
Vacuum settings PHOENIX
L300i DRY