50/102
17200234_002_C1/2016 - © Leybold
602494EA.DOCX
5.2.9
Pressure Sensor
With the sensor setting, the measurement range of the selected pressure sensor is
automatically defined. List of implemented pressure sensors see chapter
«12.1 Implemented Pressure Sensors».
In the «Port» line, the CMOVE 1250 indicates which receptacle the pressure sensor has to
be connected to
.
If you are using a pressure sensor which is not implemented in the
CMOVE 1250, choose the setting 0–10 V lin. The pressure reading will be
displayed in mV.
The «Configuration» display shows the current
settings of the operating mode, valve type, pressure
sensor, and nominal value (setpoint) with source
(I = internal, E = external). Press
to get to the «Sensor settings» display.
The «Sensor settings» display shows the sensor,
type, receptacle, and the measurement range with its
upper and lower limit. Press
to edit the sensor setting.
to return to the «Configuration» display
without saving the new setting.
The Edit symbol is displayed in the «Sensor» line.
Press.
to select among
lin.
and
log.
lin. = linear pressure sensor
log. = logarithmic pressure sensor
to edit the sensor type setting.
to save the new setting and return to the
«Configuration» display.
to return to the «Configuration» display
without saving the new setting.
SENSOR
VALVE SENSOR I/O GEN.
Mode : Pressure
Valve : MOVE1250STD
Sensor : CTR1000T
Nom. I : 1.33+01 mbar
Configuration
SAVE
SAVE
Sensor settings
Sensor : lin.
Type : CTR1000T
Port : X4-FCC68
Min : 1.33E+00
Max : 1.33E+03
SAVE
Sensor settings
Sensor : lin.
Type
:
CTR1000T
Port
:
X4-FCC68
Min
:
1.33E+00
Max
:
1.33E+03
SAVE
