Leyard Tocuhboards Planar UltraRes Series, User Manual

Page: 41 / 88

Selecting Layouts and Input Sources
Planar UltraRes Series User Manual 37
Selecting Layouts and Input Sources
With Planar MediaPlex Plus Processing, you can show one source at a time or multiple
sources simultaneously. Multiple layout options are available and can be selected
from the Inputs and Views Menu (see page 39). Once a layout has been designated,
you can assign sources to each of the zones in the layout. The selection of sources
must be made one at a time by assigning a current zone. To select the current zone,
you can navigate through the on-screen menu (see page 39). Alternatively, you can
use the remote or keypad as described next.
Remote
Press the Zone 1, Zone 2, Zone 3, or Zone 4 buttons on the remote. After selecting
the desired zone, you can press the source button (DP, HDMI 1, HDMI 2, HDMI 3,
HDMI 4, or OPS). This action will also select the active audio source.
For example, to change Zone 3 to OPS, press the Zone 3 button and then press the
OPS button.
Keypad
Press the SRC button. The input source will be toggled in the following order: HDMI 1,
HDMI 2, HDMI 3, HDMI 4, DP, OPS).
Note: Sources will toggle through the current zone, or last zone to be modified. Current
zones can only be re-assigned in the on-screen menu.