NTSC@30:
Leadshow 3G
will automatically select the deinterlacing method from one of the below:
DCDi
3:2 reverse pulldown
2:2 reverse pulldown (PAL and NTSC)
2:2 Even:
Leadshow 3G
will only use 2:2 reverse pulldown (even)
2:2 Odd:
Leadshow 3G
will only use 2:2 reverse pulldown (odd)
5.2.9 NOISE REDUCER
This option can be use to remove noise from the source video.
Off
will produce the best image quality from good video sources
Low
or
Medium
may help reduce noise from TV broadcasts or from most analogue
sources
High
or
Super
would normally only be required for exceptionally noisy video sources
Setting excessively high noise reducer levels may soften the picture
VXP Noise Reducer is available for SD (Standard Definition 480i etc) video and HD (High
Definition 1080i etc) video
5.2.10 DCDi
You can opt to disable the FLI2300 DCDi deinterlacing. If DCDi is disabled, all processing
options of the Faroudja FLI2300 are disabled.
Leadshow 3G
will use Faroudja FLI2300 deinterlacing when:
DCDi option is set to "Enabled", and
Input video source is SD (standard definition video), and
Output refresh rate is not 24/48/72 Hz
40
