manualshive.com logo in svg

Lexus RX400h2006, Owner'S Manual

Share
Download
Lexus RX400h2006 Owner'S Manual Download Page 290

STEERING WHEEL AND MIRRORS

263

Perform circling calibration just after you have purchased
your Lexus.  And then always perform circling calibration
after the battery has been removed, replaced or
disconnected.

Do not perform circling calibration of the compass in a place
where the earth’s magnetic field is subject to interference by
artificial magnetic fields (underground parking, under a steel
tower, between buildings, roof parking, near a crossing,
near a large vehicle, etc.).

During calibration, do not operate electric systems
(moonroof, power windows, etc.) as they may interfere with
the calibration.

CAUTION

When doing the circling calibration, be sure to secure
a wide space, and watch out for people and vehicles
in the neighborhood.  Do not violate any local traffic
rules while performing circling calibration.

Do not adjust the display while the vehicle is moving.
Be sure to adjust the display only when the vehicle is
stopped.

VANITY MIRRORS

To use the vanity mirror, swing the sun visor down and
open the cover.

The vanity light comes on when you open the cover.

To adjust the brightness of the vanity light, slide the knob.

Summary of Contents for RX400h2006
































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands