Lexus RX300 2003 Owner'S Manual Download Page 75

Page: 75 / 354

VANITY MIRRORS

14R001a

To use the vanity mirror, swing the sun visor down and
open the cover.

The vanity light comes on when you open the cover.

Sun visors

14R097

To block out glare from the front , swing the sun visor
down.

To block out glare from the side, remove the sun visor
from the hook and swing it to the side.

To block out glare coming obliquely from behind you,
slide the visor backwards.

At this position, the vanity light does not come on.

Summary of Contents for RX300 2003



































































































































































































































































































































































Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands

Lexus RX300 2003, Owner'S Manual

Search results

Summary of Contents for RX300 2003

Reviews:

Related manuals for RX300 2003

Brands by name

Popular brands