Lexus NX350h 2022, Owner'S Manual

Page: 579 / 804

NOTICE
■
To avoid damage to the tire pressure warning valves and transmitters
When a tire is repaired with liquid sealants, the tire pressure warning valve and transmit-
ter may not operate properly. If a liquid sealant is used, contact your Lexus dealer or
other qualified service shop as soon as possible. Make sure to replace the tire pressure
warning valve and transmitter when replacing the tire.
When replacing tires or wheels, tire pressure warning valves and transmitters must
also be installed.
When new tire pressure warning valves and transmitters are installed, new ID
codes must be registered in the tire pressure warning computer
INFORMATION
■
When replacing the tires and wheels
If the ID code of the tire pressure warning valve and transmitter is not registered, the tire
pressure warning system will not work properly.
In this case, after driving for about 20 minutes, the tire pressure warning light blinks for 1
minute and stays on to indicate a system malfunction.
Registration of the position of each wheel after performing a tire rota-
tion
It is necessary to register the position of each wheel after performing a tire
rotation.
Wheel position registration can be performed by oneself. Wheel position registra-
tion is performed by driving forward with moderate left and right turns. However,
depending on the driving conditions and driving environment, registration may
take some time to complete.
1 Park the vehicle in a safe place, turn the power switch off and wait 15 minutes or
more.
2 Start the hybrid system.
The wheel position registration procedure cannot be performed while the vehicle is
moving.
3 Select on the center display.
4 Select [Vehicle customize].
5 Select [Tire pressure].
6 Select [Tire rotation].
8-5. Tire maintenance
577
8
Maintenance and car
e