Lexus NX 300h 2016, Owner'S Manual

Page: 73 / 680

73
1-1. For safe use
1
For safety
and security
NX300h_OM_USA_OM78082U
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■
Laws and regulations pertaining to anchors
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be
used.
This vehicle is designed to conform to SAE J1819.
■
Anchor brackets (for top tether strap)
Anchor brackets are provided for
each rear seat.
Use anchor brackets when fixing the
top tether strap.
WARNING
■
When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
●
Shake the child restraint system left and right, and forward and backward to ensure
that it has been securely installed.
●
After securing a child restraint system, never adjust the seat.
●
When using the LATCH anchors, be sure that there are no foreign objects around the
anchors and that the seat belt is not caught behind the child restraint system.
●
Follow all installation instructions provided by the child restraint system manufacturer.
●
When securing some types of child restraint systems in rear seats, it may not be possi-
ble to properly use the seat belts in positions next to the child restraint without inter-
fering with it or affecting seat belt effectiveness. Be sure your seat belt fits snugly
across your shoulder and low on your hips. If it does not, or if it interferes with the child
restraint, move to a different position. Failure to do so may result in death or serious
injury.
Using an anchor bracket (for top tether strap)
6
Anchor
brackets
Rear center seat
Outboard rear seats