Lexus GS430 User Manual Download Page 87

Page: 87 / 632

SWITCHES

SEAT HEATER SWITCHES

G12024

To use the seat heater switches, pull the lever to slide the
rear console box cover backward.

G12025

1 For driver’s seat 2 For front passenger’s seat

G12026

To turn on the heater, turn the dial as shown. The indicator
light (yellow) comes on.

The engine switch must be selected in “IG

−

ON” mode.

The heating level will be increased as you turn the dial to the
higher number.

To disable this function, turn the dial to the “0” position. The
indicator light goes off. Keep the dial in this position when not
in use.

Summary of Contents for GS430

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands

Lexus GS430, User Manual

Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands