Lexus GS430 User Manual Download Page 175 | Manualshive

Page: 175 / 632

background image

OCCUPANT RESTRAINT SYSTEMS

151

G16008

Center rear seat

To raise the head restraint, pull it up. To lower it, press the
lock release button and push the head restraint down.

Center rear head restraint: When an occupant sits on the
center rear seat, always pull up the head restraint to the lock
position.

The head restraint is most effective when it is close to your
head. Therefore, using a cushion on the seatback is not
recommended.

CAUTION

Adjust the center of the head restraint so that it is
closest to the top of your ears.

After adjusting the head restraint, make sure it is
locked in position.

Do not drive with the head restraints removed.

SEAT BELTS

Seat belt precautions

Lexus strongly urges that the driver and passengers in the
vehicle be properly restrained at all times with the seat belts
provided. Failure to do so could increase the chance of injury
and/or the severity of injury in accidents.

The seat belts provided for your vehicle are designed for
people of adult size, large enough to properly wear them.

Child. Use a child restraint system appropriate for the child
until the child becomes large enough to properly wear the
vehicle’s seat belts. See ”Child restraint” on page 182 for
details.

If a child is too large for a child restraint system, the child should
sit in the rear seat and must be restrained using the vehicle’s
seat belt. According to accident statistics, the child is safer
when properly restrained in the rear seat than in the front seat.

If a child must sit in the front seat, the seat belts should be worn
properly. If an accident occurs and the seat belts are not worn
properly, the force of the rapid inflation of the airbag may cause
death or serious injury to the child.

Do not allow any children to stand up or kneel on either rear or
front seats. An unrestrained child could suffer serious injury or
death during emergency braking or a collision. Also, do not let
the child sit on your lap. Holding a child in your arms does not
provide sufficient restraint.

«
...
173
174
175
176
177
...
»

Summary of Contents for GS430

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GS430

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Brand: Samsung Pages: 133

Brand: JANE Pages: 6

Brand: iDataLink Pages: 9

Brand: APEXi Pages: 18

Brand: Prorack Pages: 15

Brand: FormFit Pages: 4

Indigo MANZA QUADRAJET 90

Brand: TATA Motors Pages: 10

Ride-Rite Air Helper Springs 2173

Brand: Firestone Pages: 4

Polaris TATOU 4S

Brand: Camoplast Pages: 13

Brand: Oldsmobile Pages: 2

Brand: Nuna Pages: 17

Brand: Flash Cover Pages: 2

Brand: Hank Pages: 2

Brand: Pacbrake Pages: 6

Brand: Billien Pages: 2

Brand: Lexus Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands