manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 91

GAUGES, METERS AND SERVICE REMINDER INDICATORS

70

ODOMETER AND TRIP METER

G13045

This meter displays the odometer and two trip meters.  To
change the mode indication, use  the “ODO TRIP” switch.

The “ODO TRIP” switch is located in the switch box.

G13004

Push the button to use the switch box and then push the
“ODO TRIP” switch.

The odometer records the total distance the vehicle has
been driven.  The twin trip meter records two different
distances independently.

For example, you can use one meter to calculate the fuel
economy and the other to measure the distance on each trip.

To change the trip meter indication from one trip to the
other, push the “ODO TRIP” change switch.  To set the A
trip meter to zero, display the A meter reading, then push
the “RESET” switch.  The same applies for the B trip
meter.

The data of trip meters will be cancelled if the electrical power
source is disconnected.

After operation, be sure to close the switch box to its original
position.

CAUTION

To reduce the chance of injury in case of an accident or
a sudden stop, keep the switch box closed when not in
use while driving.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands