manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 67

SWITCHES

46

Automatic headlight leveling system

The headlight beam level is always maintained automatically
at the proper level in all loading conditions so that your
headlights do not dazzle other road users.

If there is a problem somewhere in this system, the message
“CHECK HEADLIGHT” appears on the multi

−

information

display.  At this time, the master warning light comes on and a
warning tone sounds.  If the warning message appears, have
your vehicle checked by your Lexus dealer as soon as
possible.

Adaptive Front Lighting System (AFS)

Adaptive Front Lighting System (AFS) provides the proper
headlight beam level according to the current driving
conditions.  This system moves the headlight beam left or right
according to the turning angle of the tires.  The synergy of this
system and the automatic headlight leveling system improves
visibility at the intersections and curves.

The system operates when the vehicle speed increases above
10 km/h (6 mph), and stops when the vehicle speed drops
below 10 km/h (6 mph).

The system can operate within the limited range of the tires
turning angle.

If you do not want to activate the system, you can cancel
the system.

Adaptive Front Lighting System cancel switch is located in the
switch box.

G12017

Push the button to use the switch box.  To cancel the
system, push the “AFS” switch.  To turn it on, push it
again.

When the system is canceled, the “AFS OFF” indicator lights
up in the instrument cluster.

If the system fails, the indicator light in the instrument cluster
will flash.  If this occurs, have your vehicle checked by your
Lexus dealer.

After operation, be sure to close the switch box to its original
position.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands