manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 49

KEYS AND DOORS

28

For vehicles sold in Canada

This device complies with RSS

−

210 of Industry

Canada.
Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation of the
device.

(c) Wireless remote control*

G11014

 1

Locking the doors

 2

Unlocking the doors and opening the windows and
moon roof

 3

Unlocking the trunk lid

 4

Sounding an alarm

 5

Indicator light

NOTE:  
*This feature can be deactivated as vehicle theft deterrent
measure in case of the loss of the electronic key.  
Ask your Lexus dealer for details.

When you operate any button on the electronic key, push it
slowly and firmly.  At this time, the indicator light flashes once.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands