manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 454

STARTING AND DRIVING

433

CAUTION

If the electric power steering system warning light
comes on, take your vehicle to your Lexus dealer as
soon as possible.  In this case, more effort is required
for the steering wheel to turn than usual.  Drive your
vehicle while firmly gripping the steering wheel.

TIRE PRESSURE WARNING

SYSTEM

G31003

Low tire pressure warning light

The light warns you that the tire inflation pressure is low.

The low tire pressure warning light comes on when the engine
switch is selected in “IG

−

ON” mode and goes off after a few

seconds.  This means the low tire pressure warning light is
operating properly.  If the tire inflation pressure becomes low,
the light comes on again.  At this time, the master warning light
comes on and the message “LOW TIRE” appears on the
multi

−

information display.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands