manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 380

STARTING AND DRIVING

359

“S” mode indicator light

“S” mode allows you to use the shift range positions.

The “S” mode indicator light comes on when the selector
lever is shifted into the “S” position.  When the “S” mode
indicator light does not come on even with the selector lever
moved to the “S” position, there may be a problem
somewhere in the system. Have your vehicle
checked/repaired by your Lexus dealer as soon as
possible. In this case, you can drive in the same condition
as in the “D” position.

(c) Using engine braking

G31027

“S” mode position

To use the braking power of the engine, downshift the range in
the “S” mode position as follows:

Shift into the “5” (fifth range) position.  The transmission will
downshift to fifth gear and engine braking will be enabled.

If you drive in the “D” position: Shift the selector lever to
the “S” position and “5” (fifth range) will automatically be
selected.

If you drive in the “S” position: Shift the selector lever
down to the “–” position by selecting the “5” (fifth range).

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands