manualshive.com logo in svg

Lexus GS300, User Manual

Share
Download
Lexus GS300 User Manual Download Page 149

EXTERIOR EQUIPMENT

128

Internal trunk release handle

G15007

If a person is locked in the trunk, he/she can pull down the
phosphorescent handle on the inside of trunk lid to open
the trunk lid.

The phosphorescent (glow

−

in

−

the

−

dark) handle will continue

to glow for a time after the trunk lid is closed.  Exposing the
handle to stronger light will cause it to glow longer.

FUEL TANK CAP

15G014

This indicates that the fuel filler door is on the left side of
your vehicle.

Summary of Contents for GS300















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands