Lexus ES330 2005 Owner'S Manual Download Page 71

Page: 71 / 438

GAUGES, METERS AND SERVICE REMINDER INDICATORS

FUEL GAUGE

Low fuel level warning light

The gauge is displayed when the ignition switch is on and
indicates the approximate quantity of fuel remaining in the
tank.

It is a good idea to keep the tank over 1/4 full.
If the fuel level approaches “E” or the low fuel level warning light

comes on, fill the fuel tank as soon as possible.
On inclines or curves, due to the movement of fuel in the tank,

the fuel gauge needle may fluctuate or the low fuel level

warning light may come on earlier than usual.
If the fuel tank is completely empty, the malfunction indicator

lamp comes on. Fill the fuel tank immediately.

The indicator lamp goes off after driving several times. If the

indicator lamp does not go off, contact your Lexus dealer as

soon as possible.
See the inner back cover for fuel capacity and recommended

fuel selection.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands