Lexus ES330 2005 Owner'S Manual Download Page 40

Page: 40 / 438

KEYS AND DOORS

DOORS

Locking with key

Lock

Unlock

Turn the key towards the front of the vehicle to lock and
towards the back to unlock.

The doors lock and unlock simultaneously with the driver’s

door. Turning the key once will unlock the driver’s door and

twice in succession will unlock all doors simultaneously.*

NOTE:
* The 2−step unlocking function can be changed.
Ask your Lexus dealer for details.

If a wrong key is used, the key cylinder rotates freely to isolate

inside mechanism. So, door locking is protected from thieves.
The windows and moonroof can be opened from outside the

vehicle using the key. For details, see page 46 and page 98.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands