Lexus ES330 2005 Owner'S Manual Download Page 209

Page: 209 / 438

AIR CONDITIONING

192

When the windshield air flow button is pushed, air flows mainly

from the windshield vents and turns on the defogging function

with the purpose of clearing the front view.
Pushing this button once again returns the air flow mode to the

last one used.
This button allows the air intake to select OUTSIDE AIR mode

automatically. This is to clean up the front view more quickly.

It is not possible to return to RECIRCULATED AIR mode in the

windshield air flow mode.
Push the “A/C” button for dehumidified heating or cooling. This

setting clears the front view more quickly.

To heat the vehicle interior while defrosting the windshield,

choose floor/windshield air flow.

(d) Side vents and rear vents

Side vents

Rear vents

If air flow control is not satisfactory, check the side vents
and rear vents. The side vents and rear vents may be
opened or closed as shown.

Summary of Contents for ES330 2005























































































































































































































































































































































































































































Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands

Lexus ES330 2005, Owner'S Manual

Search results

Summary of Contents for ES330 2005

Reviews:

Related manuals for ES330 2005

Brands by name

Popular brands