Lexus 2015 NX 200t, Owner'S Manual

Page: 383 / 681

383
5-7. Connecting Bluetooth
®
NX200t_OM_USA_OM78145U
5
Le
xus
Dis
play Audi
o syst
em
Connecting a Bluetooth
®
phone
When you register a phone, auto connection will be activated. It is recom-
mended to have the system set to this mode and leave the Bluetooth
®
phone in a
place where a good connection can be established.
When the engine switch is turned to ACCESSORY or IGNITION ON mode,
the system will search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent phone that was
connected. The connected result is displayed.

Type A
When automatic connection priority is set to on and there is more than one reg-
istered Bluetooth
®
phone available, the system will automatically connect to the
Bluetooth
®
phone with the highest priority. ( → P. 386)
When auto connection has failed or “Bluetooth
*
1
Power” is turned off, you must
connect the Bluetooth
®
device manually.
Go to “Bluetooth
*
1
Setup”: “MENU” button
→
“Setup”
→
“Bluetooth
*
1
”
Select the device to connect.

Type A
Select “Connect XX
*
2
”, “Connect as a Phone” or “Connect as an Audio
Player”.

Type B
Select “Connect All”, “Connect as a Phone” or “Connect as an Audio player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(
→
P. 380)
*
1
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
*
2
: XX represents the selected device name.
There are two connecting methods available: automatic and manual.
Auto connection
Manual connection
1
2
3
3