manualshive.com logo in svg

Lexus 2013 IS250, Owner'S Manual

The Lexus 2013 IS250 Owner's Manual is available for free download on our website. This manual provides essential information about your vehicle's maintenance, features, and controls. Ensure a smooth driving experience by accessing the manual today at manualshive.com. Get all the details you need in one convenient manual.

Share
Download
background image

518

8-2. Steps to take in an emergency

IS250_EE(OM53B11E)

If the tire is inflated to more than the recommended level

Disconnect the hose from the valve.

Disconnect the hose from the valve, remove the air release cap from the hose
and then reconnect the hose.
Turn the compressor switch on and wait for several seconds, then turn it off.
Check that the air pressure indicator shows the recommended level. (

P. 544)

If the air pressure is lower than the recommended level, turn the compressor
switch on again and repeat the inflation procedure until the recommended pres-
sure is reached.

Install the air release cap to the end of the
hose and push the protrusion on the air
release cap into the valve to let some air
out.

CAUTION

Caution while driving
Observe the following precautions. 
Failure to do so may cause an accident. 

The emergency tire puncture repair kit is made exclusively for your vehicle.
Do not use it on other vehicles. 

Do not use the emergency tire puncture repair kit for tires that are a different
size than the specified ones or for any other purpose. Doing so may cause the
tires to not be repaired properly. 

Precautions for use of the sealant

Ingesting the sealant is hazardous to your health. If you ingest sealant, con-
sume as much water as possible, then immediately consult a doctor.

If sealant gets in eyes or adheres to skin, immediately wash it off with water.
If discomfort persists, consult a doctor.

1

2

3

4

Summary of Contents for 2013 IS250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 IS250

Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Monacor Carpower CAP-20 Quick Manual preview
Carpower CAP-20
Brand: Monacor Pages: 2
Gator HUDGPS1 Quick Start Manual preview
HUDGPS1
Brand: Gator Pages: 2
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
Cadillac 2005 XLR Owner'S Manual preview
2005 XLR
Brand: Cadillac Pages: 438
Yakima K1198 Instructions Manual preview
K1198
Brand: Yakima Pages: 10
Kia RIO 2005 General Information Manual preview
RIO 2005
Brand: Kia Pages: 25
Yakima FreshSesh PowderHound Manual preview
FreshSesh PowderHound
Brand: Yakima Pages: 18
Saleen 10-8002-C12167A Installation Manual preview
10-8002-C12167A
Brand: Saleen Pages: 6
Hellwig R-7694 Installation Instructions preview
R-7694
Brand: Hellwig Pages: 5
NavLinkz RL4-LR16-10 Manual preview
RL4-LR16-10
Brand: NavLinkz Pages: 26
Federal Signal Corporation CAMLCD-AHD-70 Installation And Operation Manual preview
CAMLCD-AHD-70
Brand: Federal Signal Corporation Pages: 68
T-Rex TEX-51127 Installation Manual preview
TEX-51127
Brand: T-Rex Pages: 9
Toyota RAV4 2019 Owner'S Manual preview
RAV4 2019
Brand: Toyota Pages: 244
Honda 2011 Pilot Owner'S Manual preview
2011 Pilot
Brand: Honda Pages: 574
achilles AD293 Manual preview
AD293
Brand: achilles Pages: 18

Brands by name

Popular brands

Load more brands