Lexus 2013 IS 350, Owner'S Manual

Page: 590 / 660

590
9-1. Specifications
IS350 AWD/IS350/IS300 AWD/IS300_U
■
Oil capacity (Drain and refill [Reference*])
*
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following
grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good start-
ing in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20
at the next oil change.
Lubrication system
IS350 (2WD)
IS350 AWD/IS300
AWD (AWD)
IS300
With filter
6.0 qt.
(5.7 L, 5.0 Imp. qt.)
6.8 qt.
(6.4 L, 5.6 Imp. qt.)
4.9 qt.
(4.6 L, 4.0 Imp. qt.)
Without filter
5.8 qt.
(5.5 L, 4.8 Imp. qt.)
6.3 qt.
(6.0 L, 5.3 Imp. qt.)
4.5 qt.
(4.3 L, 3.8 Imp. qt.)
Outside temperature