Lexmark XM9100 Series, User Manual

Page: 77 / 364

Copying on transparencies or letterhead
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
3
Touch Copy to , and then select the tray that contains the specialty media.
If you are loading the specialty media into the multipurpose feeder, then navigate to:
Multipurpose Feeder > > select the size of the specialty media > > Transparency or Letterhead
4
Touch > Copy It .
Creating a copy shortcut
Notes:
• Make sure that Copy Shortcuts is set to Display. From the home screen, touch > Settings > General
Settings > Home screen customization > Copy Shortcuts > Display > Submit .
•
To delete a copy shortcut, touch > Manage Shortcuts > Copy Shortcuts > the shortcut to delete > Delete
now .
Creating a copy shortcut using the printer control panel
1
From the home screen, touch Copy .
2
Adjust the copy settings, and then touch Save as Shortcut .
Note: If you change the settings after the copy shortcut has been created, then the settings are not saved.
3
Type a unique name for the shortcut, and then touch Done .
4
Verify that the shortcut name is correct, and then touch OK .
If the shortcut name is incorrect, then touch Cancel , and then reenter the information.
Notes:
• The shortcut name appears in the Copy Shortcuts icon on the printer home screen.
•
You can use the shortcut when copying another document using the same settings.
Copying 77