•
Load envelopes with the flap side up and against the left side of the tray.
Warning—Potential Damage:
Do not use envelopes with stamps, clasps, snaps, windows, coated
linings, or self
‑
stick adhesives.
5
Insert the tray.
6
From the control panel, set the paper size and paper type to match the paper loaded.
Loading the 2100
‑
sheet tray
CAUTION—TIPPING HAZARD:
To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Pull out the tray.
2
Adjust the guides.
Loading A5
‑
size paper
a
Pull up and slide the width guide to the position for A5.
Loading paper and specialty media
31
Summary of Contents for XM7355
Page 175: ...6 Insert the new ADF feed roller until it clicks into place Maintaining the printer 175...
Page 203: ...Staple jam in the staple nisher 1 Open door F Clearing jams 203...
Page 204: ...2 Remove the staple cartridge holder 3 Remove the loose staples Clearing jams 204...
Page 270: ...Upgrading and migrating 270...
