Lexmark XM7355 User Manual Download Page 276

Page: 276 / 303

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the mailbox in the print driver to make it available for print jobs. For more information, see

“Adding

available options in the print driver” on page 280

Installing the offset stacker

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, see

www.lexmark.com/multifunctionprinters

Turn off the printer.

Unplug the power cord from the electrical outlet, and then from the printer.

Unpack the offset stacker.

Remove the printer top cover.

Upgrading and migrating

276

Summary of Contents for XM7355
















































































































































































































































































































Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands

Lexmark XM7355, User Manual

Search results

Summary of Contents for XM7355

Reviews:

Related manuals for XM7355

Brands by name

Popular brands