The following error codes indicate that a non
‑
genuine Lexmark cartridge is installed:
32.13
32.16
32.19
32.22
32.25
32.28
32.31
32.34
32.37
For more information, see
“Using genuine Lexmark parts and supplies” on page 250
Note:
If you do not have a replacement imaging unit, then see the “Ordering supplies” section or visit
Replace wiper
Try one or more of the following:
•
Replace the fuser wiper in the printer.
•
Touch
Continue
to clear the message and continue printing.
Restore held jobs?
Try one or more of the following:
•
From the printer control panel, touch
Restore
to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch
Do not restore
if you do not want to restore any of the print jobs.
Scan document too long
The scan job exceeds the maximum number of pages. Touch
Cancel job
to clear the message and cancel
the scan job.
Scanner automatic feeder cover open
Close the ADF cover.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Troubleshooting
306
