Lexmark XM1135, Service Manual

Page: 240 / 510

Configuration menu
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer
for operation.
Entering the Configuration menu
1
Turn off the printer.
2
Press and hold 2 and 6 while turning on the printer.
Release the buttons when the splash screen appears.
Reset ADF Maintenance Kit Counter
After scheduled maintenance, the ADF maintenance count value must be reset to zero.
To reset the maintenance count value to zero:
1
From the Configuration menu, navigate to Reset ADF Maintenance Kit Counter .
2
Touch reset separator roll and pick assembly counter .
Resetting
displays.
3
Touch back to exit.
Maintenance Counter Value
When this is selected, the printer displays the current value for the maintenance kit counter. This counter tracks
printer usage. A print job containing a single page increments the counter by one, while a duplex print job
increments the counter by two. When the value has reached the rated life of the maintenance kit, it reminds
the user that scheduled maintenance is required. See
“Maintenance kits” on page 420 . The counter must be
reset after the maintenance kit is installed.
To view the maintenance counter value:
1
From the Configuration menu, navigate to Maintenance Counter Value .
The value is displayed and cannot be changed.
2
Press Back or X to return to the Configuration menu.
Reset Maintenance Counter
After installing the maintenance kit, the maintenance counter must be reset.
To reset the maintenance counter:
1
From the Configuration menu, navigate to Reset Maintenance Counter .
2
Depending on the printer model, press OK or touch to reset the counter, or press X to exit without
resetting the counter.
Once initiated, the operation cannot be canceled.
7015
Service menus
240