Lexmark XM1135, Service Manual

Page: 134 / 510

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, press and hold and the # button on the printer control panel simultaneously for 15 seconds.
For non
‑
touch
‑
screen printer models, press and on the printer control panel simultaneously for 15
seconds to clear the message and continue printing.
If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and
then install a genuine Lexmark supply or part.
Note: For a list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit
www.lexmark.com .
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For
non
‑
touch
‑
screen printer models, press to confirm.
•
Delete fonts, macros, and other data stored in the flash memory.
•
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
Printer had to restart. Last job may be incomplete.
From the printer control panel, touch to clear the message and continue printing. For non
‑
touch
‑
screen
printer models, press to confirm.
For more information, visit http://support.lexmark.com or contact customer support.
Reinstall defective or unresponsive cartridge [31.xy]
Remove and reinstall the toner cartridge. For more information, see the instruction sheet that came with the
supply.
7015
Diagnostics and troubleshooting
134