Lexmark XM1135, Service Manual

Page: 133 / 510

Memory full [38]
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear the message. For non
‑
touch
‑
screen printer
models, press to confirm.
•
Install additional printer memory.
Memory full, cannot print faxes
From the printer control panel, select Continue to clear the message without printing. For non
‑
touch
‑
screen
printer models, press to confirm.
Note: Held faxes will attempt to print after the printer restarts.
Memory full, cannot send faxes
1
From the printer control panel, select Continue to clear the message and cancel the fax job. For
non
‑
touch
‑
screen printer models, press to confirm.
2
Do either of the following:
•
Reduce the fax resolution, and then resend the fax job.
•
Reduce the number of pages in the fax, and then resend fax job.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, select Continue to continue printing. For non
‑
touch
‑
screen printer
models, press to confirm.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, contact customer
support.
No analog phone line connected to modem, fax is disabled.
Connect the printer to an analog phone line.
Non
‑
Lexmark [supply type], see User’s Guide [33.xy]
Note: The supply type can be toner cartridge or imaging unit.
The printer has detected a non
‑
Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components.
7015
Diagnostics and troubleshooting
133