Lexmark XC9325 User Manual Download Page 75

Page: 75 / 438

Type a printer name, and then click

Next

Select a printer sharing option, and then click

Next

Click

Finish

For Macintosh users

From a computer, open

Printers & Scanners

Click

, and then select a printer.

From the Use menu, select a print driver.

Notes:

•

To use the Macintosh print driver, select either

AirPrint

Secure AirPrint

•

If you want custom printing features, then select the Lexmark print driver. To install the driver, see

“Installing the printer software” on page 73

Add the printer.

Updating ﬁrmware

To enhance printer performance and ﬁx issues, update the printer ﬁrmware regularly.

For more information on updating the ﬁrmware, contact your Lexmark representative.

To get the latest ﬁrmware, go to

www.lexmark.com/downloads

, and then search for your printer model.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Update Firmware

Do either of the following:

•

Click

Check for updates

I agree, start update

•

Upload the ﬂash ﬁle.

Browse to the ﬂash ﬁle.

Note:

Make sure that you have extracted the ﬁrmware zip ﬁle.

Click

Upload

Start

Exporting or importing a conﬁguration ﬁle

You can export the conﬁguration settings of your printer into a text ﬁle, and then import the ﬁle to apply the
settings to other printers.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

Set up, install, and conﬁgure

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands