Lexmark XC9325 User Manual Download Page 399

Page: 399 / 438

Paper frequently jams

Action

Yes

Step 1

Remove the tray.

Check if paper is loaded correctly.

Notes:

•

Make sure that the paper guides are positioned correctly.

•

Make sure that the stack height is below the maximum
paper ﬁll indicator.

•

Make sure to print on recommended paper size and type.

Insert the tray.

Print the document.

Do paper jams occur frequently?

Go to step 2.

The problem is
solved.

Step 2

From the home screen, touch

Settings

Paper

Tray

Conﬁguration

Paper Size/Type

Set the correct paper size and type.

Print the document.

Do paper jams occur frequently?

Go to step 3.

The problem is
solved.

Step 3

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Do paper jams occur frequently?

Contact

customer

support

The problem is
solved.

Jammed pages are not reprinted

Action

Yes

From the home screen, touch

Settings

Device

Notiﬁcations

Jam Content Recovery

In the Jam Recovery menu, touch

Auto

Print the document.

Are the jammed pages reprinted?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

399

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands