Lexmark XC9325, User Manual

Page: 36 / 438

3
Select an Address protocol type, and then do one of the following:
•
For HTTP and HTTPS, type the URL that you want to bookmark.
•
For HTTPS, make sure to use the host name instead of the IP address. For example, type
myWebsite.com/sample.pdf
instead of typing
123.123.123.123/sample.pdf
. Make sure that
the host name also matches the Common Name (CN) value in the server certificate. For more information
on obtaining the CN value in the server certificate, see the help information for your web browser.
•
For FTP, type the FTP address. For example,
myServer/myDirectory
. Enter the FTP port number.
Port 21 is the default port for sending commands.
•
For SMB, type the network folder address. For example,
myServer/myShare/myFile.pdf
. Type the
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note: The application supports the following file types: PDF, JPEG, and TIFF. Other file types such as
DOCX and XLSX are supported in some printer models.
4
Click Save .
Creating folders
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Bookmarks > Add Folder , and then type a folder name.
Note: To limit access to the folder, enter a PIN.
3
Click Save .
Note: You can create folders or bookmarks inside a folder. To create a bookmark, see “Creating bookmarks”
on page 35 .
Managing contacts
1
From the home screen, touch Address Book.
2
Do one or more of the following:
•
To add a contact, touch on top of the screen, and then touch Create Contact . If necessary, specify a
login method to allow application access.
•
To delete a contact, touch on top of the screen, touch Delete Contacts , and then select the contact.
•
To edit contact information, touch the contact name.
•
To create a group, touch on top of the screen, and then touch Create Group . If necessary, specify a
login method to allow application access.
•
To delete a group, touch on top of the screen, touch Delete Groups , and then select the group.
•
To edit a contact group, touch GROUPS > select a group name > > select the action you want to make.
3
Apply the changes.
Set up, install, and configure 36