Lexmark XC9325 User Manual Download Page 34

Page: 34 / 438

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Apps

Card Copy

Conﬁgure

Notes:

•

Make sure that Display Icon is enabled.

•

Make sure that E

‑

mail Settings and Network Share Settings are conﬁgured.

•

When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and
400 dpi for black and white.

•

When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color
and 300 dpi for black and white.

Apply the changes.

Note:

You need a printer hard disk or an intelligent storage drive to scan multiple cards.

Using Display Customization

Before using the application, make sure to do the following:

•

From the Embedded Web Server, click

Apps

Display Customization

Conﬁgure

•

Enable and conﬁgure the screen saver, slideshow, and wallpaper settings.

Managing screen saver and slide show images

From the Screen Saver and Slideshow Images section, add, edit, or delete an image.

Notes:

•

You can add up to 10 images.

•

When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud

‑

based notiﬁcations.

Apply the changes.

Changing the wallpaper image

From the home screen, touch

Change Wallpaper

Select an image to use.

Apply the changes.

Running a slide show from a ﬂash drive

Insert a ﬂash drive into the USB port.

From the home screen, touch

Slideshow

Images appear in alphabetical order.

Note:

You can remove the ﬂash drive after the slide show starts, but the images are not stored in the

printer. If the slide show stops, then insert the ﬂash drive again to view the images.

Set up, install, and conﬁgure

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands