Lexmark XC9325 User Manual Download Page 33

Page: 33 / 438

Supported applications

Application

Printer models

Scan Center

CX930, CX931, XC9325, XC9335

Shortcut Center

CX930, CX931, XC9325, XC9335

Card Copy

CX930, CX931, XC9325, XC9335

Display Customization

CX930, CX931, XC9325, XC9335

Customer Support

XC9325, XC9335

Device Quotas

XC9325, XC9335

Setting up Scan Center

From the home screen, touch

Scan Center

Select and create a destination, and then conﬁgure the settings.

Notes:

•

When creating a network destination, make sure to validate and adjust the settings until no errors
occur.

•

Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.

Apply the changes.

Creating a shortcut

From the home screen, touch

Shortcut Center

Note:

The icon and name may have been changed. For more information, contact your administrator.

Select a printer function, and then touch

Create Shortcut

Note:

The Secure E

‑

mail function is not supported.

Conﬁgure the settings, and then touch

Save

Type a unique shortcut name.

Note:

To avoid clipped names on the home screen, type only up to 25 characters.

Touch

The application automatically generates a unique shortcut number.

Note:

To launch the shortcut, touch

, touch

, and then enter the shortcut number.

Setting up Card Copy

Open a web browser, and then type the printer IP address in the address ﬁeld.

Set up, install, and conﬁgure

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands