Lexmark XC9325 User Manual Download Page 262

Page: 262 / 438

Menu item

Description

Proﬁles List

Print a list of proﬁles that are stored in the printer.

Asset Report

Print a diagnostic tool for print problems.

Note:

To avoid clipping the content, print the report on letter

‑

or A4

‑

size

paper.

Print

Menu item

Description

Print Fonts

PCL Fonts

PS Fonts

Print samples and information about the fonts that are available in each printer
language.

Print Demo

Demo Page

Print a page that shows the printer capabilities and supported solutions.

Print Directory

Print the resources that are stored in the ﬂash drive or printer hard disk.

Note:

This menu item appears only when a ﬂash drive or printer hard disk is

installed.

Shortcuts

Menu item

Description

All Shortcuts

Print a report that lists the shortcuts that are stored in the printer.

Note:

Fax Shortcuts appears only when fax is installed.

Fax Shortcuts

Copy Shortcuts

‑

mail Shortcuts

FTP Shortcuts

Network Folder Shortcuts

Fax

Note:

This menu appears only if Fax is conﬁgured, and Enable Job Log is set to On.

Menu item

Description

Fax Job Log

Print a report about the last 200 completed fax jobs.

Fax Call Log

Print a report about the last 100 attempted, received, and blocked calls.

Use printer menus

262

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands