Menu item
Description
Allow Save as Shortcut
Off
On*
Save copy settings as a shortcut.
Sample Copy
Off*
On
Print a sample copy to check the quality before printing the remaining copies.
Note:
This menu item appears only when a hard disk is installed.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Fax
Fax Defaults
Fax Mode
Menu item
Description
Fax Mode
Fax
Fax Server
Disabled
Select a fax mode.
Note:
Depending on your printer model, the factory default
setting may vary.
Fax Setup
Note:
This menu is available only in printers that are registered to the etherFax portal or installed with a fax
card.
General Fax settings
Menu item
Description
Fax Name
Identify your fax machine.
Fax Number
Identify your fax number.
Fax ID
Fax Name
Fax Number*
Notify fax recipients of your fax name or fax number.
Enable Manual Fax
Off*
On
Turn on the manual fax function in the printer.
Notes:
•
This menu item requires a line splitter and a telephone handset.
•
Use a regular telephone line to answer an incoming fax job and to dial a
fax number.
•
To go directly to the manual fax function, touch
#
and
0
on the keypad.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Use printer menus
208
Summary of Contents for XC9325
