Lexmark XC9325 User Manual Download Page 172

Page: 172 / 438

Scan

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)

Scanner glass

•

Use the ADF for multiple

‑

page or two-sided

documents.

•

Load an original document faceup. For multiple

‑

page

documents, make sure to align the leading edge
before loading.

•

Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

•

Use the scanner glass for single

‑

page documents,

book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).

•

Place the document facedown in the corner with the
arrow.

Scanning to a computer

Before you begin, make sure that the computer and the printer are connected to the same network.

For Windows users

Using Lexmark ScanBack Utility

From the computer, run Lexmark ScanBack Utility, and then click

Next

Note:

To download the utility, go to

www.lexmark.com/downloads

Click

Setup

, and then add the printer IP address.

Note:

View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

Click

Close

Next

Select the size of the original document, and then click

Next

Select a ﬁle format and scan resolution, and then click

Next

Type a unique scan proﬁle name, and then click

Next

Scan

172

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands