Lexmark XC9325 User Manual Download Page 149

Page: 149 / 438

Using Lexmark Mobile Assistant

Depending on your mobile device, download the Lexmark Mobile Assistant application from either the App
Store or Google Play

From the printer home screen, touch

Settings

Network/Ports

Wireless

Setup Using Mobile App

Printer ID

From your mobile device, launch the application, and then accept the Terms of Use.

Note:

If necessary, grant permissions.

Tap

Connect to Printer

Go to Wi

‑

Fi Settings

Connect your mobile device to the printer wireless network.

Return to the application, and then tap

Setup Wi-Fi Connection

Select a Wi-Fi network, and then type the network password.

Tap

Done

Connecting the printer to a wireless network using Wi

‑

Fi Protected Setup

(WPS)

Before you begin, make sure that:

•

The access point (wireless router) is WPS

‑

certiﬁed or WPS

‑

compatible. For more information, see the

documentation that came with your access point.

•

A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.

•

Active Adapter is set to Auto. From the home screen, touch

Settings

Network/Ports

Network Overview

Active Adapter

Using the Push Button method

From the home screen, touch

Settings

Network/Ports

Wireless

‑

Fi Protected Setup

Start Push

Button Method

Follow the instructions on the display.

Using the personal identiﬁcation number (PIN) method

From the home screen, touch

Settings

Network/Ports

Wireless

‑

Fi Protected Setup

Start PIN

Method

Copy the eight

‑

digit WPS PIN.

Open a web browser, and then type the IP address of your access point in the address ﬁeld.

Notes:

•

To know the IP address, see the documentation that came with your access point.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Access the WPS settings. For more information, see the documentation that came with your access point.

Enter the eight

‑

digit PIN, and then save the changes.

Set up, install, and conﬁgure

149

Summary of Contents for XC9325























































































































































































































































































































































































































































Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands

Lexmark XC9325, User Manual

Search results

Summary of Contents for XC9325

Reviews:

Related manuals for XC9325

Brands by name

Popular brands