Lexmark XC9225 User Manual Download Page 86

Page: 86 / 338

Accessibility

Menu item

Description

Duplicate Key Strike Interval

0–5 (0*)

Set the interval in seconds during which the printer ignores duplicate key
presses on an attached keyboard.

Key Repeat Initial Delay

0.25–5 (1*)

Set the initial length of delay in seconds before a repeating key starts
repeating.

Note:

This menu item appears only when a keyboard is attached to the

printer.

Key Repeat Rate

0.5–30 (30*)

Set the number of presses per second for a repeating key.

Note:

This menu item appears only when a keyboard is attached to the

printer.

Prolong Screen Timeout

Off*

Let the user remain in the same location and reset the Screen Timeout
timer when it expires instead of returning to the home screen.

Headphone Volume

1–10 (5*)

Adjust the headphone volume.

Note:

This menu item appears only when a headphone is attached to

the printer.

Enable Voice Guidance When
Headphone Is Attached

Off*

Enable Voice Guidance when a headphone is attached to the printer.

Speak Passwords/PINs

Off*

Set the printer to read out loud passwords or personal identiﬁcation
numbers.

Note:

This menu item appears only when a headphone or a speaker is

attached to the printer.

Speech Rate

Very Slow

Slow

Normal*

Fast

Faster

Very Fast

Rapid

Very Rapid

Fastest

Set the Voice Guidance speech rate.

Note:

This menu item appears only when a headphone or a speaker is

attached to the printer.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands