Lexmark XC9225, User Manual

Page: 56 / 338

Copying on letterhead
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Copy From > select the size of the original document.
3
Touch Copy To , and then select the paper source that contains the letterhead.
If you loaded the letterhead into the multipurpose feeder, then navigate to:
Copy To > Multipurpose Feeder > select a paper size > Letterhead
4
Copy the document.
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Paper Setup .
3
Adjust the settings.
4
Copy the document.
Reducing or enlarging copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Scale > specify a scale value
Note: Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
3
Copy the document.
Collating copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Collate > On [1,2,1,2,1,2] .
3
Copy the document.
Placing separator sheets between copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Separator Sheets .
3
Adjust the settings.
4
Send the copy job.
Copying 56