Lexmark XC9225 User Manual Download Page 191

Page: 191 / 338

Using the printhead wiper, clean the printhead lens.

Insert the paper guide.

Secure the transfer belt.

Reattach the door stopper.

Close the door, and then turn on the printer.

Replacing the transfer roller

Open door C.

Notes:

•

Make sure that the door does not hit any cable attached to the printer.

•

If a 3000

‑

sheet tray is installed, then slide the tray to the right to open the door.

CAUTION—HOT SURFACE:

The inside of the printer might be hot. To reduce the risk of injury from a

hot component, allow the surface to cool before touching it.

Maintaining the printer

191

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Brands by name

Popular brands