Lexmark XC9225 User Manual Download Page 103

Page: 103 / 338

Paper

Tray Conﬁguration

Menu item

Description

Default Source

Tray [x] (1*)

Multipurpose Feeder

Manual Paper

Manual Envelope

Set the paper source for all print jobs.

Paper Size/Type

Tray [x]

Multi

‑

Purpose Feeder

Manual Paper

Manual Envelope

Specify the paper size or paper type loaded in each paper source.

Substitute Size

Off

Statement/A5

Letter/A4

11 x 17/A3

All Listed*

Set the printer to substitute a speciﬁed paper size if the requested size is not
loaded in any paper source.

Notes:

•

Off prompts the user to load the required paper size.

•

All Listed allows all available substitutions.

Conﬁgure MP

Cassette*

Manual

First

Determine the behavior of the multipurpose feeder.

Notes:

•

Cassette conﬁgures the multipurpose feeder as the automatic paper
source.

•

Manual sets the multipurpose feeder only for manual-feed print jobs.

•

First conﬁgures the multipurpose feeder as the primary paper source.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Media Conﬁguration

Universal Setup

Menu item

Description

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note:

Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Portrait Width

3–52 inches (8.5*)

76–1321 mm (216*)

Set the portrait width of the universal paper.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

103

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands